MidiMagic
2K Club - QQ Super Nova
- Joined
- Jul 5, 2010
- Messages
- 2,256
I am using one too.
A modern A/V receiver as an alternative to buying a vintage quad receiver: Denon AVR-3802
- Thread starter vjdave
- Start date
Help Support QuadraphonicQuad:
I picked up one of these for $20
https://av-receivers.net/denon/denon-avr-2112ci-review/
Impressive set of features: component in to HDMI video conversion, native 2496 FLAC support, networking, USB port for thumbdrive, 7.1 sound, yada yada
90 watts per channel looked optimistic to me: but checking the service manual/schematic & verifying inside, it has 7 identical output sections. So it doesn't just have strong fronts & lesser surrounds. It may well be. Massive power transformer.
No multichannel analog ins, so the Surroundmaster won't interface with it, but I have a separate setup for the SM.
https://av-receivers.net/denon/denon-avr-2112ci-review/
Impressive set of features: component in to HDMI video conversion, native 2496 FLAC support, networking, USB port for thumbdrive, 7.1 sound, yada yada
90 watts per channel looked optimistic to me: but checking the service manual/schematic & verifying inside, it has 7 identical output sections. So it doesn't just have strong fronts & lesser surrounds. It may well be. Massive power transformer.
No multichannel analog ins, so the Surroundmaster won't interface with it, but I have a separate setup for the SM.
Thank you for mentioning the Zektor. That would be a good solution if I needed to add additional MCH (Quad) analog inputs to my Denon AVR.
DON'T part with it! It's built better, and sounds better, than a lot of the new models available today. That's one reason why I still have, and use, my AVR-3300.
The Zektor sounds like a better option for me, too. Where can you get it?
I would search eBay.
Apparently Zektor has been bought up by US-based Pulse-Eight.
https://www.cepro.com/news/pulse_eight_acquires_zektor_av_distribution_product/
When things were changing to HDMI from component video there were a lot of switch boxes for sale at rock bottom prices. They usually switch two channels of audio and the three component video signals, so good for up to five channels, some have a connection for composite video as well so good for up to 6 channels. You should be able to find something suitable if you look long enough.
As an avid DIYer I would build my own, or better still build an op-amp based mixer with multiple multichannel inputs. I have used such a system since the late seventies!
Ya beat me to it Ken. I was just about to post essentially the same thing. There is one on Ebay right now that would do the trick:
https://www.ebay.com/itm/2853770975...T5F3kE9IrWkgyuPYOaaH5RpczR|tkp:Bk9SR9KL3or9Yg
It comes with the power supply but says no remote. That's not a problem as there are push buttons to select. And Zektor has a clever way of learning how to work with your remote anyway.
After playing around with the AVR-2112 I like it. I don't have the Denon microphone to run the calibration though: does anyone know what kind of mic it uses? Will any generic mic work?
Otherwise the USB plug on the front is super useful. I have been putting 2496 FLAC files on a thumbdrive & using it as a media player.
I wish it could play multichannel FLAC/WAV files though!! It only recognizes stereo format. Has anyone hacked the firmware on these Denon receivers? It seems to only work with HDMI sources of multichannel audio. Which I haven't got around to testing yet....nor the networking file sharing. With USB it's nice not to need a PC running to play files.
Otherwise the USB plug on the front is super useful. I have been putting 2496 FLAC files on a thumbdrive & using it as a media player.
I wish it could play multichannel FLAC/WAV files though!! It only recognizes stereo format. Has anyone hacked the firmware on these Denon receivers? It seems to only work with HDMI sources of multichannel audio. Which I haven't got around to testing yet....nor the networking file sharing. With USB it's nice not to need a PC running to play files.
I just bought two Zektor HDS4.2's when the seller offered me a good deal for both. I think that I'll use them to hook up some of my vintage decoders instead of using the Russound QT-1 patch panel which I'll save for use with my tape machines.
Not as pretty as the Zektor but for less money you can use the very same switch that I was using with my bedroom set-up. Search eBay for Philips SWS2325W/17 .
I didn't know that it was made for Philips as my unit bears no such brand name anywhere. I recommend it if you need switching for up to six channels. It is a purely passive unit. The signal just passes through a set of switch contacts. I paid $10 (or maybe less) for mine at a thrift shop.
I don't use input 1 as it lacks the Component video connections and so is only good for 2 or 3 channels. If you can find adaptor cables you could use the S-Video inputs as well to add two more channels.
Some picture of the inside of mine.
Not as pretty as the Zektor but for less money you can use the very same switch that I was using with my bedroom set-up. Search eBay for Philips SWS2325W/17 .
I didn't know that it was made for Philips as my unit bears no such brand name anywhere. I recommend it if you need switching for up to six channels. It is a purely passive unit. The signal just passes through a set of switch contacts. I paid $10 (or maybe less) for mine at a thrift shop.
I don't use input 1 as it lacks the Component video connections and so is only good for 2 or 3 channels. If you can find adaptor cables you could use the S-Video inputs as well to add two more channels.
Some picture of the inside of mine.
Wow... Given the the inclusion of S-Video, that little Philips SWS2325W/17 A/V selector offers a lot of flexibility
Edit: I've got a couple of analogue (5.1-ch) surround sound switches in a box somewhere, which I could use for switching between component video sources...
Edit: I've got a couple of analogue (5.1-ch) surround sound switches in a box somewhere, which I could use for switching between component video sources...
Last edited:
Well, good news on the AVR-2112: it plays back multichannel audio via HDMI from my PC!
I was not expecting that to work. So I can rip my blurays & just play the files from a hard drive. And test surround mixes through something other than studio monitors. Woohoo!
I was not expecting that to work. So I can rip my blurays & just play the files from a hard drive. And test surround mixes through something other than studio monitors. Woohoo!
Nice one... Which software media players have you tried?
Thanks! Foobar for audio, mediaplayer classic for blurays. I use Reaper for recording: haven't tried it's output via HDMI though. Kind of a pain to switch devices so I probably won't bother, since the others work.
Funny enough, my version of VLC won't play any bluray discs. But it's an ancient version: I'm still using windows 7 OS & old hardware.
HDCP is listed as "not supported" which is why I assumed HDMI into the Denon wouldn't work. But maybe that's why it does work? Anyway I'm not complaining!
Wow! I didn’t read this prior to my post this morning. It is such an interesting alternative to maintaining vintage equipment and I may actually get to this point in the future. I would have to figure out playback of cd-4 and such. Anyway, I have seen that switcher in Youtube videos. Would that work between a vintage Sansui 9001 and a Denon from 2010? I would hate to fry any electronics. Plus, not sure how I could use it, but was curious about your opinion. Thanks for sharing your approach. Love that you have quad reels. I am about to sell my Stereo Akai deck - i have loved playing people’s home taped reels, but many are dirty or from smoked in homes and require too much maintenance cleaning heads. Too bad - it was my favorite medium and so much fun to see how people chise to mix and match music! I love the music and equipment in this hobby! Take care,
I've previous used and posted about these Denon AVRs in the 3802 - 3803 model range. I got a 3803 for $60 on Craig's List, and then I bought the original remote control for it on ebay for about $45 as I wanted full control of the unit. What I discovered after about 5 or 6 months of use is that there were a couple of issues I could not accept in my situation.
Pros:
1. The 5.1 sound quality was quite nice
2. The unit was powerful, no doubt
3. 5.1 Analog inputs
4. Used prices for these good sounding units is rather low
Cons:
1. No HDMI inputs or outs (for both 3802 & 3803)
2. The tone controls seemed to add a noticeable veiled sound quality, like they were digitally processed
3. The phono input made everything coming from vinyl sound like digital (it had to have been converting A to D and back to A)
4. If I recall correctly, a monitor was required to adjust each speaker vinyl level independently. Front panel did not display it on at least one of the two models I tried using. I believe oddly it was the 3803 that did not display this on front panel, and the 3802 did?
So I could not get over the fact that my analog vinyl sounded harsh and digitally processed. The final straw was when I put on a beautiful vintage Prince 12" single that was cleaned well and ready to send out to a buyer ($50) who just bought it from me. It was from pre-1983-ish and there was no way it was a digital mix/master, yet it sounded like a CD. Kind of harsh sounding in every frequency.
Ok, so back to Craig's List. For about $140 I got another AVR the Yamaha RX-V3800 (no remote control included) which has several things going for it over the Denon. It was only a few years newer than the $60 Denon.
1. Several HDMI ins and out
2. 7.1 analog ins (for potential future Atmos)
3. and 7.1 pre-outs (perfect)
4. level controls for each channel (with remote only) are viewable on front panel
5. Phono inputs sound like analog, smooth and rich, no digital glare
6. a slightly nicer sound quality over the Denon
So the Yamaha won out for me with too many more good things going for it which i needed. And of course I still had to go back to ebay for the remote control, but this time it was $25 + shipping and tax.
I really love this old Yamaha RX-V3800. The audiophile / Hi-Fi forums have noted something about this model. That is that the HDMI boards were likely to fail early on and often needed to be replaced. Yamaha knew of this and thus helped buyers out if and when it happened. So after I got everything hooked up and running, I checked the HDMI port, no issues, it was working 100% fine. Maybe my unit had it replaced early on? Anyway, it's an old AVR but just late enough to have 7.1 analog ins/outs and HDMI as well. Perfect middle ground covering what most folks need.
