My pioneer VX 350 from the 70's

QuadraphonicQuad

Help Support QuadraphonicQuad:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Steven Ray

New member
Joined
Jan 12, 2025
Messages
2
Location
United States
It started crackling on the right side on and off. Well recently I took it almost completely apart and cleaned all the boards and everything I could.
When I put it back together it sounded like new But then the right side started crackling again.
Iz there anything I can do to stop it¿
I mean it sounded a little worse than when you don't have a station tuned in...
 
It started crackling on the right side on and off. Well recently I took it almost completely apart and cleaned all the boards and everything I could.
When I put it back together it sounded like new But then the right side started crackling again.
Iz there anything I can do to stop it¿
I mean it sounded a little worse than when you don't have a station tuned in...
Try DeOxit (or a good contact cleaner) on the volume control as well as all other controls and switches. IMHO with vintage gear dirty or corroded contacts are the greatest source of trouble (even more so than bad capacitors or noisy transistors). It sounds like you are on the right track.

If you had a scope you could trace a signal through the unit to see where the noise starts. I know that It can be very frustrating when you think that you have the problem fixed and then the noise starts up again!
 
Back
Top