QQ Media Player NUC Buyers Club - Discussion

[LuvMyQuad]

Ok. Running Windows on wired connection with a 15TB hard drive attached.
I'm trying to get Kodi to access the drive with all the music on it.
My PC sees the Nuc and i can move folders in and out no problem. But I can't get the Nuc to see my 2 Pc's on the network, but it does see 2 Synology boxes i have on the network. Just tried the instructions in post 397 with no luck.

​

Were you able to determine the IP adresses of the two PCs?

 

[Driver Vic]

Yep, tried that. I can't seem to get my head around this. (Above my pay grade.)
I know a person who knows a person, and this will be sorted.
Thanks for your suggestions.

 

[HomerJAU]

I'm trying to get Kodi to access the drive with all the music on it.

OK. I just went through the process. Its a Kodi Settings that needs to be changed:

Go to the Kodi System-> Services window:

Scroll down to: SMB client on left

Find the Setting: Enable WS-Discovery Service

Enable that setting (as shown above)


With that enabled:

TO ADD A SHARED FOLDER OR DRIVE ON A WINDOWS PC:

Go to MEDIA Settings, MUSIC

and add a new Kodi MUSIC source:

Add Music
then: Browse

Then select: Windows Ntwork (SMB)

then: Select your PC (by name)

Then: Enter your PC's share Username & Password:

And: Enable: Remember for this path

To Save you must navigate to the small 'Tick' icon/button at top right and Click on it to Save

Now you will see all the Shared folders on your PC:

Select the one to your want (see above):

Save again navigating to the top right 'TICK' and CLICK to save

Now Kodi will ask if you want to Scan the folders into your Koi Music Library

(This is already documented in the NUC docs)

CLICK: YES

And YES, I agree that horrible SAVE icon on these dialogs is terrible. I do not know why they do not have big SAVE buttons

 

[Driver Vic]

Thanks for all your effort. I'll try it next chance i get.

 

[MrBurns]

And YES, I agree that horrible SAVE icon on these dialogs is terrible. I do not know why they do not have big SAVE buttons

Re-skin it then, you know you want to !!!

SMB is pretty horrible, but I guess most people are probably using that to share their stuff. NFS is better and faster but you either need to buy a consumer NAS or roll your own (or indeed, just share via nfs from some pc(s), like me!!).

I tried loading files using my Android TV or AVR - they both choked on the entire library (~30k tracks)

My library is roughly 28k tracks and Kodi copes with that with no issues. Individual song selection and filtering is a little slow but that's down to the sql(ite) queries not kodi itself.

[/QUOTE]

Im in a bit of a kodi transition. Up to now, all artist info was stored in the local music folders (the stereo folders to be exact). The fanart, info, logo, etc. At one of the prior updates, kodi started creating artist information folders, also stored locally, and there is info in there as well.

The centralized artist information directory that Is implemented on the QQ build is certainly the way to go. Should i start deleting the local stuff?

It appears during playback, kodi continues to use the local thumbnail. Should i keep it that way? Are there thumbnails in the Artist information directory? If i have thumbs i really like, i can place them there correct?

I run 2 kodi boxes in my house. One on my surround setup and one stereo setup in my master bedroom. They share the same NAS. Garry mentioned that i would want to move the artist information directory to my NAS, point both kodi boxes to it, and update only that one directory.

Yeah, a centralized Artist Information Directory is certainly the way to go, especially given that you are likely using some form of shared db (MySQL, MariaDB etc). Once done, updating on either Kodi box will automatically share that with the other. Thumbs, I'm not sure about. I'd have to look at the code but I do know that if you change one in a directory, Kodi won't reflect that for 24 hours, after which it will update. Scanning might change that though.

 

[HomerJAU]

I use NFS for all my Kodi devices with media on two Synology NASs.

These QQ NUCs have NVME SSDs (local Kodi database) and 8GB RAM so no probs with 30k+ tracks.

EDIT: My next How To will be Adding Music Sources from a NAS using NFS.

 

[SeeMoreDigital]

I've just found out my NUC is currently at a south London distribution centre. Hopefully i'll receive it in a couple of days time

 

[LuvMyQuad]

SMB is pretty horrible, but I guess most people are probably using that to share their stuff. NFS is better and faster but you either need to buy a consumer NAS or roll your own (or indeed, just share via nfs from some pc(s), like me!!).

Can you elaborate on the advantages of using NFS? You said its better and faster, so i guess faster is an advantage. I assume you mean faster data transfer?

 

[beerking]

I've just found out my NUC is currently at a south London distribution centre. Hopefully i'll receive it in a couple of days time

Same here

 

[skinner07crooner]

Same here

Indeed, mine as well!!

 

[MrBurns]

Can you elaborate on the advantages of using NFS? You said its better and faster, so i guess faster is an advantage. I assume you mean faster data transfer?

Yes. NFS has less overheads compared to SMB so network transfer is faster. It's not hugely faster but it could make a difference if you have lots of other local traffic on your network. For me, that's kids streaming stuff, TVHeadend serving to up to 4 instances, radio streaming etc.
Also, given that all my kit is based around Linux, NFS gives me a finer control over who can access what. EG, kids can have read access but no write access. There is a load of tech stuff behind this but it's easier with NFSv4 than v3. Kids don't have access to 'sudo' anyway, so there is no chance that they can log in as root and change anything.
If I'd set this all up with Windows servers etc I'd have gone down the SMB route as that's the native file-sharing method. With Linux. I had a choice but went with NFS because that's more native than smb (and for me was easier to get working).

There isn't really a right or wrong way. Everyone has different needs, different kit etc so it just boils down to "whatever works for you" and that's the right way to go. Fortunately, Kodi supports NFS, SMB, HTTP(s), webdav, FTTP(s), etc etc so a good variety of ways to share things around!!!

 

[reedfoot]

I have three easy (I hope) questions this morning.

[1] I can turn off the unit with the remote, but I cannot turn it on. I remember reading that the remote needs to wake up, so I tried pushing random buttons and then the power buttons (tried them both) and nothing. What am I missing? (Of course, I probably need the steps to walk across the room to press the power button on the unit.)
[2] How can I get the menu on the top of the screen? I have accidentally gotten it throughout my goofing, but I can't recreate what I did when I want it.
[3] Related to Q2, how can I Stop music? I can use the pause/play button, but the only Stop command I have found is on the mysterious top menu that I can't locate reliably.

I added the unit to my Logitech Harmony remote today, but used the Intel setting, so the Harmony says it has no control capabilities (I have the 950 without the Hub, which I don't think has Bluetooth). I'll be curious to see if the Microsoft Kodi setting (that I saw referenced after I redid my Harmony) is any different. But first I had to crawl...I'm getting closer to getting on my own two feet!

 

[LuvMyQuad]

I have three easy (I hope) questions this morning.

[1] I can turn off the unit with the remote, but I cannot turn it on. I remember reading that the remote needs to wake up, so I tried pushing random buttons and then the power buttons (tried them both) and nothing. What am I missing? (Of course, I probably need the steps to walk across the room to press the power button on the unit.)
[2] How can I get the menu on the top of the screen? I have accidentally gotten it throughout my goofing, but I can't recreate what I did when I want it.
[3] Related to Q2, how can I Stop music? I can use the pause/play button, but the only Stop command I have found is on the mysterious top menu that I can't locate reliably.

I added the unit to my Logitech Harmony remote today, but used the Intel setting, so the Harmony says it has no control capabilities (I have the 950 without the Hub, which I don't think has Bluetooth). I'll be curious to see if the Microsoft Kodi setting (that I saw referenced after I redid my Harmony) is any different. But first I had to crawl...I'm getting closer to getting on my own two feet!

There is no remote turn on function. Turn on is manual. The fix is to not power it off. The fan will shut off when the machine is at idle and the cpu temp falls below 40C

I assume you are talking about the menu with the player controls. When playing, it should come up with a press of OK on the remote. If you are using lyrics, you have to back out of them with the back button first, then press ok. If that isnt happening well talk again.

Stop music with the stop button on the player control bar

I cant help with any Logi Harmony questions. No experience with it.

 

[steelydave]

I think you can turn on a NUC via an IR remote command if you enable wake-on-LAN, though I've never personally done it as my NUC is on 24/7.

 

[LuvMyQuad]

I have three easy (I hope) questions this morning.

[1] I can turn off the unit with the remote, but I cannot turn it on. I remember reading that the remote needs to wake up, so I tried pushing random buttons and then the power buttons (tried them both) and nothing. What am I missing? (Of course, I probably need the steps to walk across the room to press the power button on the unit.)
[2] How can I get the menu on the top of the screen? I have accidentally gotten it throughout my goofing, but I can't recreate what I did when I want it.
[3] Related to Q2, how can I Stop music? I can use the pause/play button, but the only Stop command I have found is on the mysterious top menu that I can't locate reliably.

I added the unit to my Logitech Harmony remote today, but used the Intel setting, so the Harmony says it has no control capabilities (I have the 950 without the Hub, which I don't think has Bluetooth). I'll be curious to see if the Microsoft Kodi setting (that I saw referenced after I redid my Harmony) is any different. But first I had to crawl...I'm getting closer to getting on my own two feet!

You might also want to have a look at this

https://www.quadraphonicquad.com/fo...dition-kodi-media-player-ui-navigation.37226/

 

[reedfoot]

You might also want to have a look at this

https://www.quadraphonicquad.com/fo...dition-kodi-media-player-ui-navigation.37226/

I remembered seeing this, but didn't look for it as I should have. Drinking from the fire hose!

Is there a way to refresh the library for a single artist? I ripped my Toto IV SACD and re-tagged the files to see if I understand how this tagging works, but the Update Library rescan took about an hour to get to the Rs, and then while reviewing the remote info above I pushed a button that for some reason restarted the NUC, so I am trying to avoid starting it all over - I just want to add the new Toto files and refresh the retagged ones.

 

[steelydave]

I remembered seeing this, but didn't look for it as I should have. Drinking from the fire hose!

Is there a way to refresh the library for a single artist? I ripped my Toto IV SACD and re-tagged the files to see if I understand how this tagging works, but the Update Library rescan took about an hour to get to the Rs, and then while reviewing the remote info above I pushed a button that for some reason restarted the NUC, so I am trying to avoid starting it all over - I just want to add the new Toto files and refresh the retagged ones.

Go into the music section, and then scroll down until you find 'files' and navigate to the artist, or specific album folder, and hold the enter button on your remote until a menu pops up - one of the options on that menu will allow you to rescan that folder only.

 

[reedfoot]

Go into the music section, and then scroll down until you find 'files' and navigate to the artist, or specific album folder, and hold the enter button on your remote until a menu pops up - one of the options on that menu will allow you to rescan that folder only.

Thanks, that worked - wow, would have saved me a lot of time earlier, but I will benefit going forward.

Is there a way to delete a folder hierarchy from the library? I had added a folder on my NAS where I temporarily stored my SACD rips, but now that I will be merging them into the main 'music' library I don't want the NUC to keep looking there.

 

[HomerJAU]

Is there a way to delete a folder hierarchy from the library?

Navigate to the Media settings, go to Music sources, go to the the Source folder, long click: from popup menu Remove Source