I need a new decoder/processor/preamp - suggestions please

Find deals on ebay
Advertise with us
Amazon
QuadraphonicQuad

Help Support QuadraphonicQuad:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
G

godathunder

Active Member
QQ Supporter
Joined
Dec 15, 2020
Messages
51
Location
ireland
My semi-ancient Emotiva UMC-1 has given up the ghost and I find myself in need of a replacement

I currently have a 7.1 system but may as well use this as an excuse to upgrade to a 7.4.1 atmos setup

Im looking for just a processor rather than a receiver with built in amplification although Id consider that route if all else fails.

Needs to have 4+ HDMI, 1+ Toslink, 1+ Analogue Inputs. HDMI out and preferably unbalanced audio outs. Idealy a 12v output to trigger amplifiers

Im based in Ireland so can access the European and UK markets.

My budget is pretty modest - ideally under 500 euros. Consequently I expect I'll be looking at the used market rather than new

What models released in the last couple of years are worth keeping my eyes open for. If you happen to know of something for sale, I'd love a link to it.

So, all suggestions gratefully received
 
500 euros is about $550 US dollars, give or take. If you do find a used, Atmos capable AVP for that price let me know as well. I think the closest you are going to get is a used Emotiva MC-1 or a used Tonewinner AT 300. And neither one will handle high res 5.1 as good as your UMC-1 did. Maybe better luck with the preamp section of a used receiver that has blown power amps and pre outs.
 
Last edited:
I'm also researching the pre/pro market. The school I teach at is putting an Atmos room together and I want to play Blu-ray Discs through the system. We only need the pre/pro for disc playback of 7.1.4 Atmos. HDMI in and balanced XLR outs preferred. Not worried about cost just yet as I'm not the one paying for it! 😇
 
godathunder said:
My semi-ancient Emotiva UMC-1 has given up the ghost and I find myself in need of a replacement

I currently have a 7.1 system but may as well use this as an excuse to upgrade to a 7.4.1 atmos setup

Im looking for just a processor rather than a receiver with built in amplification although Id consider that route if all else fails.

Needs to have 4+ HDMI, 1+ Toslink, 1+ Analogue Inputs. HDMI out and preferably unbalanced audio outs. Idealy a 12v output to trigger amplifiers

Im based in Ireland so can access the European and UK markets.

My budget is pretty modest - ideally under 500 euros. Consequently I expect I'll be looking at the used market rather than new

What models released in the last couple of years are worth keeping my eyes open for. If you happen to know of something for sale, I'd love a link to it.

So, all suggestions gratefully received
Click to expand...

Denon 3600: https://www.audiosciencereview.com/...ds/denon-avr-x3600h-av-receiver-review.12676/

Denon 3700 is also a good option and might be easier to find but it will likely cost you more and you would likely have to stretch your budget a little with the 3600 already.

Budget avr pre-amps are non-existent.
 
Do they even put Analog inputs on any lower to mid range AVR's anymore?
I only have one surviving AVR with analog inputs personally, and I bought it at least twenty years ago.
Buying older equipment (for the analog inputs) could be OK if you get a deal I guess. But you're not going to get processing for the newer codecs.

Since Onkyo came out with their new flagship RZ70 and lower priced RZ30, the 7100 and RZ50's have really come down in price. No mch analog inputs, but they do have pre-outs for separate amps.
I have an RZ50 and they are going for half or less what I paid two years ago.
 
SeeMoreDigital said:
As Atmos/DTS:X 'processors' go your choice is petty limited and sadly not cheap. There's an Emotive BasX MC1, a IOTAVX AVX17 and a ToneWinner AT-300.

They are all made by ToneWinner in China...
Click to expand...
Expensive yes but it is all relative. Look at the price of stereo/quad equipement in the early seventies and convert that to todays money and you would be shocked! If I wanted to add Atmos I could go for something like that (ToneWinner AT-300)! They are available for less than 2K CAD.

When you look at what is involved (features) in one of those units (it even sports balanced outputs), the price tag is more than justified. We have become spoiled by cheaply priced electronics coming from China.

Oh, did I say that I hate AVR's!
 
Last edited:
mandrix said:
Do they even put Analog inputs on any lower to mid range AVR's anymore?
I only have one surviving AVR with analog inputs personally, and I bought it at least twenty years ago.
Buying older equipment (for the analog inputs) could be OK if you get a deal I guess. But you're not going to get processing for the newer codecs.

Since Onkyo came out with their new flagship RZ70 and lower priced RZ30, the 7100 and RZ50's have really come down in price. No mch analog inputs, but they do have pre-outs for separate amps.
I have an RZ50 and they are going for half or less what I paid two years ago.
Click to expand...
SeeMoreDigital said:
Good question... It would appear they do albeit stereo only and not just phono, many offer stereo CD/DVD, Cable/Sat and Aux inputs...
Click to expand...
Actually, I believe the Tonewinner does allow it's analog inputs to be configured as a single multichannel input.
 
You must log in or register to reply here.

Latest posts

Back
Top