Production update! Discount update! Pre-orders Live!

[DuncanS]

Err, Umm

I am a rather large fool at the best of times and I am a bit dumb on these damned receivers. Some of the genius guys in this forum will no doubt correct me if I am wrong!!

Here is your rear panel:

View attachment 112998

I think you are correct to take the L/R zone 2 output and put the SM decode to the input multichannel zone 1.

Re those 2 recordings, do you know what format they were recorded in? Your best default mode if its not SQ is the "INVOLVE " mode for all else.

If you have a "switched " smart outlet, plug the SM into it and leave the SM on/ off button in the inwards ON position and all should automatically turn on.

I have an AVC-X8500HA, but I use an external Phone pre-amp connected to the SM2 with a switch to take either the TT or Blu-ray stereo o/ps to the SM2. The most irritating thing with the Denon is having to go into Set-up to switch to the multi-channel analogue input, it can't be done via a remote button, or at least I haven't found any other way.

 

[~dave~~wave~]

Dear Charlie

I would really like to see the new evaluation decoder board. Even the layout would be interesting.

Thanks

Take a look at this thread:
https://www.quadraphonicquad.com/forums/threads/involve-sm-evaluation-board.24812/post-827695

 

[DJPauly]

Err, Umm

I am a rather large fool at the best of times and I am a bit dumb on these damned receivers. Some of the genius guys in this forum will no doubt correct me if I am wrong!!

Here is your rear panel:

View attachment 112998

I think you are correct to take the L/R zone 2 output and put the SM decode to the input multichannel zone 1.

Re those 2 recordings, do you know what format they were recorded in? Your best default mode if its not SQ is the "INVOLVE " mode for all else.

If you have a "switched " smart outlet, plug the SM into it and leave the SM on/ off button in the inwards ON position and all should automatically turn on.

Thanks Chucky! Ordered some fresh RCA cables today so I'll be ready when it arrives.

The Steely Dan Quad vinyl pressings don't specifically say if they're SQ or QS. Maybe you or another reader has some insight? Discogs entries for my specific pressings below:

https://www.discogs.com/release/8191481-Steely-Dan-Cant-Buy-A-Thrill
https://www.discogs.com/release/2766286-Steely-Dan-Countdown-To-Ecstasy
https://www.discogs.com/release/2899323-Steely-Dan-Pretzel-Logic

 

[Sonik Wiz]

Thanks Chucky! Ordered some fresh RCA cables today so I'll be ready when it arrives.

The Steely Dan Quad vinyl pressings don't specifically say if they're SQ or QS. Maybe you or another reader has some insight? Discogs entries for my specific pressings below:

https://www.discogs.com/release/8191481-Steely-Dan-Cant-Buy-A-Thrill
https://www.discogs.com/release/2766286-Steely-Dan-Countdown-To-Ecstasy
https://www.discogs.com/release/2899323-Steely-Dan-Pretzel-Logic

The SD quads are QS encoded. Use the Involve setting. Actually I don't know that the evaluation board gives you a choice of SQ. just Involve/QS.

 

[chucky3042]

The SD quads are QS encoded. Use the Involve setting. Actually I don't know that the evaluation board gives you a choice of SQ. just Involve/QS.

Just QS but if you ask us nicely we can do a special SQ only

 

[Sonik Wiz]

Just QS but if you ask us nicely we can do a special SQ only

Or, buy an SM v3 that does both. And 5.1. And more!

 

[DJPauly]

I have an AVC-X8500HA, but I use an external Phone pre-amp connected to the SM2 with a switch to take either the TT or Blu-ray stereo o/ps to the SM2. The most irritating thing with the Denon is having to go into Set-up to switch to the multi-channel analogue input, it can't be done via a remote button, or at least I haven't found any other way.

Duncan: I spent a little time figuring out how to assign the 7.1 Input to the AUX 1 input on my remote through the settings. Also changed the name of the input so it will display "Surr Master" on the Denon when I choose it. Happy to walk you through the steps to customize your setup too. DM me.

 

[DJPauly]

The SD quads are QS encoded. Use the Involve setting. Actually I don't know that the evaluation board gives you a choice of SQ. just Involve/QS.

Thanks bud!

 

[Mark Anderson]

Thanks Chucky! Ordered some fresh RCA cables today so I'll be ready when it arrives.

The Steely Dan Quad vinyl pressings don't specifically say if they're SQ or QS. Maybe you or another reader has some insight? Discogs entries for my specific pressings below:

https://www.discogs.com/release/8191481-Steely-Dan-Cant-Buy-A-Thrill
https://www.discogs.com/release/2766286-Steely-Dan-Countdown-To-Ecstasy
https://www.discogs.com/release/2899323-Steely-Dan-Pretzel-Logic

This link should help you out
https://www.surrounddiscography.com/quaddisc/quadpall.htm

 

[Overture]

Dear Charlie

I would really like to see the new evaluation decoder board. Even the layout would be interesting.

Thanks

Ahoy!

I'll snap a few photos at the office tomorrow.